Length 1-2um Nickel Coated Multi Walled Carbon Nanotubes
Ni Plated MWCNT Short
|Name||Ni Plated Multi Walled Carbon Nanotubes Short|
|Diameter||8-20nm / 20-30nm / 30-60nm / 60-100nm|
|Package||25g, 50g, 100g, 1kg or as required|
|Potential applications||Conductive, composite material, catalyst, sensors, etc.|
Due to its high aspect ratio (within tens of nanometers in diameter, several microns to hundreds of microns in length), carbon nanotubes are the finest fiber materials at present, which have shown excellent mechanical properties and unique electrical properties. It is exciting that because it is a one-dimensional material with hollow structure, it can be used as a template to prepare a new kind of one-dimensional material.
Research shows that the average young’s modulus of a single multi-layer carbon nanotube is 1.8tpa, showing super mechanical properties; the bending strength is 14.2gpa, showing super toughness. Therefore, carbon nanotubes will have a great prospect in the field of composite materials. However, nickel plating on its surface Nickle plate Multi Walled Carbon Nanobuts Ni-MWCNT will further improve the physical properties such as conductivity, corrosion resistance, hardness and lubricity. It can not only be used as an improved conductive material, but also as a corrosion-resistant, wear-resistant coating, thermal barrier and sealing coating, microwave absorbing material, etc. In addition, coating metal material on the surface of carbon nanotubes will form a continuous high-strength bond between carbon nanotubes and metal matrix, overcoming the poor bond between carbon nanotubes and metal matrix. This is an indispensable key step in the preparation of super composite materials by carbon nanotubes.
Ni Plated Multi Walled Carbon Nanotubes Short should be well sealed, be stored in cool, dry place, avoid direct light. Room temperature storage is OK.
SEM & XRD :
Q1: I’m interested in your products, but now I’m out of China, could you offer your labels to my country?
A1: Sure. We ‘ve got full exportation experience, and no matter where you are, we may arrange the delivery for you, either by sea, by air or by express , depending on your need.
Q2 : How can I get the samples ?
A2: We can provide you a free sample for our existing products, the lead time is around 1-2 days. You need to pay the sample delivery cost, If you need the samples according to your design, the sample cost has to be charged from you. The lead time is around 5 days.
Q3: Is it possible to custom the labels with my own design?
A3: Yes, and you just need to send us your drawings or artworks, then you can get you want.
Q4: How can I release the payment to you?
A4: We can receive your payment by T/T, ESCROW or Western union which is recommended and we can also receive by L/C, D/P, D/A. OA
Q5: How do you check all the goods in the production line?
A5: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure